You go to any Java interview, senior or junior, experience or freshers, you are bound to see couple of questions from thread, concurrency and multi-threading. In fact this built-in concurrency support is one of the strongest point of Java programming language and helped it to gain popularity among enterprise world and programmers equally. Most of lucrative Java developer position demands excellent core Java multi-threading skills and experience on developing, debugging and tuning high performance low latency concurrent Java applications. This is the reason, it is one of the most sought after skill on interviews. In a typical Java interview, Interviewer slowly starts from basic concepts of Thread by asking questions like, why you need threads, how to create threads, which one is better way to create threads e.g. by extending thread class or implementing Runnable and then slowly goes into Concurrency issues, challenges faced during development of concurrent Java applications, Java memory model, higher order concurrency utilities introduced in JDK 1.5, principles and design patterns of concurrent Java applications, classical multi-threading problems e.g. producer consumer, dining philosopher, reader writer or simply bounded buffer problems. Since its not enough just to know basics of threading, you must know how to deal with concurrency problems e.g. deadlock, race conditions, memory inconsistency and various thread safety related issues. These skills are thoroughly get tested by presenting various multi-threading and concurrency problems. Many Java developers are used to only look and read interview questions before going for interview, which is not bad but you should not be too far away. Also collecting questions and going through same exercise is too much time consuming, that's why I have created this list of top 50 Java multi-threading and concurrency related questions, collected from various interviews. I am only going to add new and recent interview questions as and when I am going to discover them. By the way, I have not provided answers of this questions here, Why? because I expect most of Java developer to know the answers of this question and if not, also answers are widely available by using Google. If you don't find answer of any particular question, you can always ask me in comments section. You can even find answers of few questions on the link provided or my earlier post Top 12 Java Thread Questions with Answers.
50 Interview questions from Java Multi-threading and Concurrency
Here is our list of top questions from Java thread, concurrency and multi-threading. You can use this list to prepare well for your Java interview.
1) What is Thread in Java?
Thread is an independent path of execution. It's way to take advantage of multiple CPU available in a machine. By employing multiple threads you can speed up CPU bound task. For example, if one thread takes 100 millisecond to do a job, you can use 10 thread to reduce that task into 10 millisecond. Java provides excellent support for multi-threading at language level, and its also one of strong selling point. For more details see here
2) Difference between Thread and Process in Java?
Thread is subset of Process, in other words one process can contain multiple threads. Two process runs on different memory space, but all threads share same memory space. Don't confuse this with stack memory, which is different for different thread and used to store local data to that thread. For more detail see this answer.
3) How do you implement Thread in Java?
At language level, there are two ways to implement Thread in Java. An instance of java.lang.Thread represent a thread but it need a task to execute, which is instance of interface java.lang.Runnable. Since Thread class itself implement Runnable, you can override run() method either by extending Thread class or just implementing Runnable interface. For detailed answer and discussion see this article.
4) When to use Runnable vs Thread in Java?
This is follow-up of previous multi-threading interview question. As we know we can implement thread either by extending Thread class or implementing Runnable interface, question arise, which one is better and when to use one? This question will be easy to answer, if you know that Java programming language doesn't support multiple inheritance of class, but it allows you to implement multiple interface. Which means, its better to implement Runnable than extends Thread, if you also want to extend another class e.g. Canvas or CommandListener. For more points and discussion you can also refer this post.
6) Difference between start() and run() method of Thread class?
One of trick Java question from early days, but still good enough to differentiate between shallow understanding of Java threading model start() method is used to start newly created thread, while start() internally calls run() method, there is difference calling run() method directly. When you invoke run() as normal method, its called in the same thread, no new thread is started, which is the case when you call start() method. Read this answer for much more detailed discussion.
7) Difference between Runnable and Callable in Java?
Both Runnable and Callable represent task which is intended to be executed in separate thread. Runnable is there from JDK 1.0, while Callable was added on JDK 1.5. Main difference between these two is that Callable's call() method can return value and throw Exception, which was not possible with Runnable's run() method. Callable return Future object, which can hold result of computation. See my blog post on same topic for more in-depth answer of this question.
8) Difference between CyclicBarrier and CountDownLatch in Java?
Though both CyclicBarrier and CountDownLatch wait for number of threads on one or more events, main difference between them is that you can not re-use CountDownLatch once count reaches to zero, but you can reuse same CyclicBarrier even after barrier is broken. See this answer for few more points and sample code example.
9) What is Java Memory model?
Java Memory model is set of rules and guidelines which allows Java programs to behave deterministically across multiple memory architecture, CPU, and operating system. It's particularly important in case of multi-threading. Java Memory Model provides some guarantee on which changes made by one thread should be visible to others, one of them is happens-before relationship. This relationship defines several rules which allows programmers to anticipate and reason behaviour of concurrent Java programs. For example, happens-before relationship guarantees :
- Each action in a thread happens-before every action in that thread that comes later in the program order, this is known as program order rule.
- An unlock on a monitor lock happens-before every subsequent lock on that same monitor lock, also known as Monitor lock rule.
- A write to a volatile field happens-before every subsequent read of that same field, known as Volatile variable rule.
- A call to Thread.start on a thread happens-before any other thread detects that thread has terminated, either by successfully return from Thread.join() or by Thread.isAlive() returning false, also known as Thread start rule.
- A thread calling interrupt on another thread happens-before the interrupted thread detects the interrupt( either by having InterruptedException thrown, or invoking isInterrupted or interrupted), popularly known as Thread Interruption rule.
- The end of a constructor for an object happens-before the start of the finalizer for that object, known as Finalizer rule.
- If A happens-before B, and B happens-before C, then A happens-before C, which means happens-before guarantees Transitivity.
I strongly suggest to read Chapter 16 of Java Concurrency in Practice to understand Java Memory model in more detail.
10) What is volatile variable in Java?
volatile is a special modifier, which can only be used with instance variables. In concurrent Java programs, changes made by multiple threads on instance variables is not visible to other in absence of any synchronizers e.g. synchronized keyword or locks. Volatile variable guarantees that a write will happen before any subsequent read, as stated "volatile variable rule" in previous question. Read this answer to learn more about volatile variable and when to use them.
11) What is thread-safety? is Vector a thread-safe class? (Yes, see details)
Thread-safety is a property of an object or code which guarantees that if executed or used by multiple thread in any manner e.g. read vs write it will behave as expected. For example, a thread-safe counter object will not miss any count if same instance of that counter is shared among multiple threads. Apparently, you can also divide collection classes in two category, thread-safe and non-thread-safe. Vector is indeed a thread-safe class and it achieves thread-safety by synchronizing methods which modifies state of Vector, on the other hand, its counterpart ArrayList is not thread-safe.
12) What is race condition in Java? Given one example?
Race condition are cause of some subtle programming bugs when Java programs are exposed to concurrent execution environment. As name suggests, race condition occurs due to race between multiple threads, if a thread which is supposed to execute first lost the race and executed second, behaviour of code changes, which surface as non-deterministic bugs. This is one of the hardest bugs to find and re-produce because of random nature of racing between threads. One example of race condition is out-of-order processing, see this answer for some more example of race conditions in Java programs.
13) How to stop thread in Java?
I always said that Java provides rich APIs for everything but ironically Java doesn't provide a sure shot way of stopping thread. There was some control methods in JDK 1.0 e.g. stop(), suspend() and resume() which was deprecated in later releases due to potential deadlock threats, from then Java API designers has not made any effort to provide a consistent, thread-safe and elegant way to stop threads. Programmers mainly rely on the fact that thread stops automatically as soon as they finish execution of run() or call() method. To manually stop, programmers either take advantage of volatile boolean variable and check in every iteration if run method has loops or interrupt threads to abruptly cancel tasks. See this tutorial for sample code of stopping thread in Java.
14) What happens when an Exception occurs in a thread?
This is one of the good tricky Java question I have seen on interviews. In simple words, If not caught thread will die, if an uncaught exception handler is registered then it will get a call back. Thread.UncaughtExceptionHandler is an interface, defined as nested interface for handlers invoked when a Thread abruptly terminates due to an uncaught exception. When a thread is about to terminate due to an uncaught exception the Java Virtual Machine will query the thread for its UncaughtExceptionHandler using Thread.getUncaughtExceptionHandler() and will invoke the handler's uncaughtException() method, passing the thread and the exception as arguments.
15) How do you share data between two thread in Java?
You can share data between threads by using shared object, or concurrent data-structure like BlockingQueue. See this tutorial to learn inter thread communication in Java. It implements Producer consumer pattern using wait and notify methods, which involves sharing objects between two threads.
16) Difference between notify and notifyAll in Java?
This is another tricky questions from core Java interviews, since multiple threads can wait on single monitor lock, Java API designer provides method to inform only one of them or all of them, once waiting condition changes, but they provide half implementation. There notify() method doesn't provide any way to choose a particular thread, that's why its only useful when you know that there is only one thread is waiting. On the other hand, notifyAll() sends notification to all threads and allows them to compete for locks, which ensures that at-least one thread will proceed further. See my blog post on similar topic for more detailed answer and code example.
17) Why wait, notify and notifyAll are not inside thread class?
This is a design related question, which checks what candidate thinks about existing system or does he ever thought of something which is so common but looks in-appropriate at first. In order to answer this question, you have to give some reasons why it make sense for these three method to be in Object class, and why not on Thread class. One reason which is obvious is that Java provides lock at object level not at thread level. Every object has lock, which is acquired by thread. Now if thread needs to wait for certain lock it make sense to call wait() on that object rather than on that thread. Had wait() method declared on Thread class, it was not clear that for which lock thread was waiting. In short, since wait, notify and notifyAll operate at lock level, it make sense to defined it on object class because lock belongs to object. You can also see this article for more elaborate answer of this question.
18) What is ThreadLocal variable in Java?
ThreadLocal variables are special kind of variable available to Java programmer. Just like instance variable is per instance, ThreadLocal variable is per thread. It's a nice way to achieve thread-safety of expensive-to-create objects, for example you can make SimpleDateFormat thread-safe using ThreadLocal. Since that class is expensive, its not good to use it in local scope, which requires separate instance on each invocation. By providing each thread their own copy, you shoot two birds in one arrow. First, you reduce number of instance of expensive object by reusing fixed number of instances, and Second, you achieve thread-safety without paying cost of synchronization or immutability. Another good example of thread local variable is ThreadLocalRandom class, which reduces number of instances of expensive-to-create Random object in multi-threading environment. See this answer to learn more about thread local variables in Java.
19) What is FutureTask in Java?
FutureTask represents a cancellable asynchronous computation in concurrent Java application. This class provides a base implementation of Future, with methods to start and cancel a computation, query to see if the computation is complete, and retrieve the result of the computation. The result can only be retrieved when the computation has completed; the get methods will block if the computation has not yet completed. A FutureTask object can be used to wrap a Callable or Runnable object. Since FutureTask also implements Runnable, it can be submitted to an Executor for execution.
20) Difference between interrupted and isInterrupted method in Java?
Main difference between interrupted() and isInterrupted() is that former clears the interrupt status while later does not. The interrupt mechanism in Java multi-threading is implemented using an internal flag known as the interrupt status. Interrupting a thread by calling Thread.interrupt() sets this flag. When interrupted thread checks for an interrupt by invoking the static method Thread.interrupted(), interrupt status is cleared. The non-static isInterrupted() method, which is used by one thread to query the interrupt status of another, does not change the interrupt status flag. By convention, any method that exits by throwing an InterruptedException clears interrupt status when it does so. However, it's always possible that interrupt status will immediately be set again, by another thread invoking interrupt
21) Why wait and notify method are called from synchronized block?
Main reason for calling wait and notify method from either synchronized block or method is that it made mandatory by Java API. If you don't call them from synchronized context, your code will throw IllegalMonitorStateException. A more subtle reason is to avoid race condition between wait and notify calls. To learn more about this, check my similarly titled post here.
22) Why you should check condition for waiting in a loop?
Its possible for a waiting thread to receive false alerts and spurious wake up calls, if it doesn't check the waiting condition in loop, it will simply exit even if condition is not met. As such, when a waiting thread wakes up, it cannot assume that the state it was waiting for is still valid. It may have been valid in the past, but the state may have been changed after the notify() method was called and before the waiting thread woke up. That's why it always better to call wait() method from loop, you can even create template for calling wait and notify in Eclipse. To learn more about this question, I would recommend you to read Effective Java items on thread and synchronization.
23) Difference between synchronized and concurrent collection in Java?
Though both synchronized and concurrent collection provides thread-safe collection suitable for multi-threaded and concurrent access, later is more scalable than former. Before Java 1.5, Java programmers only had synchronized collection which becomes source of contention if multiple thread access them concurrently, which hampers scalability of system. Java 5 introduced concurrent collections like ConcurrentHashMap, which not only provides thread-safety but also improves scalability by using modern techniques like lock stripping and partitioning internal table. See this answer for more differences between synchronized and concurrent collection in Java.
24) Difference between Stack and Heap in Java?
Why do someone this question as part of multi-threading and concurrency? because Stack is a memory area which is closely associated with threads. To answer this question, both stack and heap are specific memories in Java application. Each thread has their own stack, which is used to store local variables, method parameters and call stack. Variable stored in one Thread's stack is not visible to other. On other hand, heap is a common memory area which is shared by all threads. Objects whether local or at any level is created inside heap. To improve performance thread tends to cache values from heap into their stack, which can create problems if that variable is modified by more than one thread, this is where volatile variables comes in picture. volatile suggest threads to read value of variable always from main memory. See this article to learn more about stack and heap in Java to answer this question in greater detail.
25) What is thread pool? Why should you thread pool in Java?
Creating thread is expensive in terms of time and resource. If you create thread at time of request processing it will slow down your response time, also there is only a limited number of threads a process can create. To avoid both of these issue, a pool of thread is created when application starts-up and threads are reused for request processing. This pool of thread is known as "thread pool" and threads are known as worker thread. From JDK 1.5 release, Java API provides Executor framework, which allows you to create different types of thread pools e.g. single thread pool, which process one task at a time, fixed thread pool (a pool of fixed number of thread) or cached thread pool (an expandable thread pool suitable for applications with many short lived tasks). See this article to learn more about thread pools in Java to prepare detailed answer of this question.
26) Write code to solve Producer Consumer problem in Java?
Most of the threading problem you solved in real world are of category of Producer consumer pattern, where one thread is producing task and other thread is consuming that. You must know how to do inter thread communication to solve this problem. At lowest level, you can use wait and notify to solve this problem, and at high level you can leverage Semaphore or BlockingQueue to implement Producer consumer pattern, as shown in this tutorial.
27) How do you avoid deadlock in Java? Write Code?
Deadlock is a condition in which two threads wait for each other to take action which allows them to move further. It's a serious issue because when it happen your program hangs and doesn't do the task it is intended for. In order for deadlock to happen, following four condition must be true :
- Mutual Exclusion : At least one resource must be held in a non-shareable mode. Only one process can use the resource at any given instant of time.
- Hold and Wait : A process is currently holding at least one resource and requesting additional resources which are being held by other processes.
- No Pre-emption : The operating system must not de-allocate resources once they have been allocated; they must be released by the holding process voluntarily.
- Circular Wait : A process must be waiting for a resource which is being held by another process, which in turn is waiting for the first process to release the resource.
Easiest way to avoid deadlock is to prevent Circular wait, and this can be done by acquiring locks in a particular order and releasing them in reverse order, so that a thread can only proceed to acquire a lock if it held the other one. Check this tutorial for actual code example and detailed discussion on techniques of avoiding deadlock in Java.
28) Difference between livelock and deadlock in Java?
This question is extension of previous interview question. A livelock is similar to a deadlock, except that the states of the threads or processes involved in the livelock constantly change with regard to one another, without any one progressing further. Livelock is a special case of resource starvation. A real-world example of livelock occurs when two people meet in a narrow corridor, and each tries to be polite by moving aside to let the other pass, but they end up swaying from side to side without making any progress because they both repeatedly move the same way at the same time. In short, main difference between livelock and deadlock is that in former state of process change but no progress is made.
29) How do you check if a Thread holds a lock or not?
I didn't even know that you can check if a Thread already holds lock before this question hits me in a telephonic round of Java interview. There is a method called holdsLock() on java.lang.Thread, it returns true if and only if the current thread holds the monitor lock on the specified object. You can also check this article for more detailed answer.
30) How do you take thread dump in Java?
There are multiple ways to take thread dump of Java process depending upon operating system. When you take thread dump, JVM dumps state of all threads in log files or standard error console. In windows you can use Ctrl + Break key combination to take thread dump, on Linux you can use kill -3 command for same. You can also use a tool called jstack for taking thread dump, it operate on process id, which can be found using another tool called jps.
31) Which JVM parameter is used to control stack size of thread?
This is the simple one, -Xss parameter is used to control stack size of Thread in Java. You can see this list of JVM options to learn more about this parameter.
32) Difference between synchronized and ReentrantLock in Java?
There were days when only way to provide mutual exclusion in Java was via synchronized keyword, but it has several shortcomings e.g. you can not extend lock beyond a method or block boundary, you can not give up trying for a lock etc. Java 5 solves this problem by providing more sophisticated control via Lock interface. ReentrantLock is a common implementation of Lock interface and provides re-entrant mutual exclusion Lock with the same basic behaviour and semantics as the implicit monitor lock accessed using synchronized methods and statements, but with extended capabilities. See this article to learn about those capabilities and some more differences between synchronized vs ReentrantLock in Java.
33) There are three threads T1, T2 and T3? How do you ensure sequence T1, T2, T3 in Java? Sequencing in multi-threading can be achieved by different means but you can simply use join() method of thread class to start a thread when another one is finished its execution. To ensure three threads execute you need to start the last one first e.g. T3 and then call join methods in reverse order e.g. T3 calls T2. join, and T2 calls T1.join, this ways T1 will finish first and T3 will finish last. To learn more about join method, see this tutorial.
34) What does yield method of Thread class do?
Yield method is one way to request current thread to relinquish CPU so that other thread can get chance to execute. Yield is a static method and only guarantees that current thread will relinquish the CPU but doesn't say anything about which other thread will get CPU. Its possible for same thread to get CPU back and start its execution again. See this article to learn more about yield method and to answer this question better.
35) What is concurrence level of ConcurrentHashMap in Java?
ConcurrentHashMap achieves it's scalability and thread-safety by partitioning actual map into number of sections. This partitioning is achieved using concurrency level. It's optional parameter of ConcurrentHashMap constructor and it's default value is 16. The table is internally partitioned to try to permit the indicated number of concurrent updates without contention. To learn more about concurrency level and internal resizing, see my post How ConcurrentHashMap works in Java.
36) What is Semaphore in Java?
Semaphore in Java is a new kind of synchronizer. It's a counting semaphore. Conceptually, a semaphore maintains a set of permits. Each acquire() blocks if necessary until a permit is available, and then takes it. Each release() adds a permit, potentially releasing a blocking acquirer. However, no actual permit objects are used; the Semaphore just keeps a count of the number available and acts accordingly. Semaphore is used to protect expensive resource which is available in fixed number e.g. database connection in pool. See this article to learn more about counting Semaphore in Java.
37) What happens if you submit task, when queue of thread pool is already fill?
This is another tricky question in my list. Many programmer will think that it will block until a task is cleared but its true. ThreadPoolExecutor's submit() method throws RejectedExecutionException if the task cannot be scheduled for execution.
38) Difference between submit() and execute() method thread pool in Java?
Both method are ways to submit task to thread pools but there is slight difference between them. execute(Runnable command) is defined in Executor interface and executes given task in future, but more importantly it does not return anything. It's return type is void. On other hand submit() is overloaded method, it can take either Runnable or Callable task and can return Future object which can hold pending result of computation. This method is defined on ExecutorService interface, which extends Executor interface, and every other thread pool class e.g. ThreadPoolExecutor or ScheduledThreadPoolExecutor gets these methods. To learn more about thread pools you can check this article.
39) What is blocking method in Java?
A blocking method is a method which blocks until task is done, for example accept() method of ServerSocket blocks until a client is connected. here blocking means control will not return to caller until task is finished. On the other hand there are asynchronous or non-blocking method which returns even before task is finished. To learn more about blocking method see this answer.
40) Is Swing thread-safe? What do you mean by Swing thread-safe?
You can simply this question as No, Swing is not thread-safe, but you have to explain what you mean by that even if interviewer doesn't ask about it. When we say swing is not thread-safe we usually refer its component, which can not be modified in multiple threads. All update to GUI components has to be done on AWT thread, and Swing provides synchronous and asynchronous callback methods to schedule such updates. You can also read my article to learn more about swing and thread-safety to better answer this question. Even next two questions are also related to this concept.
41) Difference between invokeAndWait and invokeLater in Java?
These are two methods Swing API provides Java developers to update GUI components from threads other than Event dispatcher thread. InvokeAndWait() synchronously update GUI component, for example a progress bar, once progress is made, bar should also be updated to reflect that change. If progress is tracked in a different thread, it has to call invokeAndWait() to schedule an update of that component by Event dispatcher thread. On other hand, invokeLater() is asynchronous call to update components. You can also refer this answer for more points.
42) Which method of Swing API are thread-safe in Java?
This question is again related to swing and thread-safety, though components are not thread-safe there are certain method which can be safely call from multiple threads. I know about repaint(), and revalidate() being thread-safe but there are other methods on different swing components e.g. setText() method of JTextComponent, insert() and append() method of JTextArea class.
43) How to create Immutable object in Java?
This question might not look related to multi-threading and concurrency, but it is. Immutability helps to simplify already complex concurrent code in Java. Since immutable object can be shared without any synchronization its very dear to Java developers. Core value object, which is meant to be shared among thread should be immutable for performance and simplicity. Unfortunately there is no @Immutable annotation in Java, which can make your object immutable, hard work must be done by Java developers. You need to keep basics like initializing state in constructor, no setter methods, no leaking of reference, keeping separate copy of mutable object to create Immutable object. For step by step guide see my post, how to make an object Immutable in Java. This will give you enough material to answer this question with confidence.
44) What is ReadWriteLock in Java?
In general, read write lock is result of lock stripping technique to improve performance of concurrent applications. In Java, ReadWriteLock is an interface which was added in Java 5 release. A ReadWriteLock maintains a pair of associated locks, one for read-only operations and one for writing. The read lock may be held simultaneously by multiple reader threads, so long as there are no writers. The write lock is exclusive. If you want you can implement this interface with your own set of rules, otherwise you can use ReentrantReadWriteLock, which comes along with JDK and supports a maximum of 65535 recursive write locks and 65535 read locks.
45) What is busy spin in multi-threading?
Busy spin is a technique which concurrent programmers employ to make a thread wait on certain condition. Unlike traditional methods e.g. wait(), sleep() or yield() which all involves relinquishing CPU control, this method does not relinquish CPU, instead it just runs empty loop. Why would someone do that? to preserve CPU caches. In multi core system, its possible for a paused thread to resume on different core, which means rebuilding cache again. To avoid cost of rebuilding cache, programmer prefer to wait for much smaller time doing busy spin. You can also see this answer to learn more about this question.
46) Difference between volatile and atomic variable in Java?
This is an interesting question for Java programmer, at first, volatile and atomic variable look very similar, but they are different. Volatile variable provides you happens-before guarantee that a write will happen before any subsequent write, it doesn't guarantee atomicity. For example count++ operation will not become atomic just by declaring count variable as volatile. On the other hand AtomicInteger class provides atomic method to perform such compound operation atomically e.g. getAndIncrement() is atomic replacement of increment operator. It can be used to atomically increment current value by one. Similarly you have atomic version for other data type and reference variable as well.
47) What happens if a thread throws an Exception inside synchronized block?
This is one more tricky question for average Java programmer, if he can bring the fact about whether lock is released or not is key indicator of his understanding. To answer this question, no matter how you exist synchronized block, either normally by finishing execution or abruptly by throwing exception, thread releases the lock it acquired while entering that synchronized block. This is actually one of the reason I like synchronized block over lock interface, which requires explicit attention to release lock, generally this is achieved by releasing lock in finally block.
48) What is double checked locking of Singleton?
This is one of the very popular question on Java interviews, and despite its popularity, chances of candidate answering this question satisfactory is only 50%. Half of the time, they failed to write code for double checked locking and half of the time they failed how it was broken and fixed on Java 1.5. This is actually an old way of creating thread-safe singleton, which tries to optimize performance by only locking when Singleton instance is created first time, but because of complexity and the fact it was broken for JDK 1.4, I personally don't like it. Anyway, even if you not prefer this approach its good to know from interview point of view. Since this question deserve a detailed answer, I have answered in a separate post, you can read my post how double checked locking on Singleton works to learn more about it.
49) How to create thread-safe Singleton in Java?
This question is actually follow-up of previous question. If you say you don't like double checked locking then Interviewer is bound to ask about alternative ways of creating thread-safe Singleton class. There are actually man, you can take advantage of class loading and static variable initialization feature of JVM to create instance of Singleton, or you can leverage powerful enumeration type in Java to create Singleton. I actually preferred that way, you can also read this article to learn more about it and see some sample code.
50) List down 3 multi-threading best practice you follow?
This is my favourite question, because I believe that you must follow certain best practices while writing concurrent code which helps in performance, debugging and maintenance. Following are three best practices, I think an average Java programmer should follow :
- Always give meaningful name to your threadThis goes a long way to find a bug or trace an execution in concurrent code. OrderProcessor, QuoteProcessor or TradeProcessor is much better than Thread-1. Thread-2 and Thread-3. Name should say about task done by that thread. All major framework and even JDK follow this best practice.
- Avoid locking or Reduce scope of Synchronization
Locking is costly and context switching is even more costlier. Try to avoid synchronization and locking as much as possible and at bare minimum, you should reduce critical section. That's why I prefer synchronized block over synchronized method, because it gives you absolute control on scope of locking. - Prefer Synchronizers over wait and notify
Synchronizers like CountDownLatch, Semaphore, CyclicBarrier or Exchanger simplifies coding. It's very difficult to implement complex control flow right using wait and notify. Secondly, these classes are written and maintained by best in business and there is good chance that they are optimized or replaced by better performance code in subsequent JDK releases. By using higher level synchronization utilities, you automatically get all these benefits. - Prefer Concurrent Collection over Synchronized Collection
This is another simple best practice which is easy to follow but reap good benefits. Concurrent collection are more scalable than their synchronized counterpart, that's why its better to use them while writing concurrent code. So next time if you need map, think about ConcurrentHashMap before thinking Hashtable. See my article Concurrent Collections in Java, to learn more about modern collection classes and how to make best use of them.
51) How do you force start a Thread in Java?
This question is like how do you force garbage collection in Java, their is no way, though you can make request using System.gc() but its not guaranteed. On Java multi-threading their is absolute no way to force start a thread, this is controlled by thread scheduler and Java exposes no API to control thread schedule. This is still a random bit in Java.
52) What is fork join framework in Java?
The fork join framework, introduced in JDK 7 is a powerful tool available to Java developer to take advantage of multiple processors of modern day servers. It is designed for work that can be broken into smaller pieces recursively. The goal is to use all the available processing power to enhance the performance of your application. One significant advantage of The fork/join framework is that it uses a work-stealing algorithm. Worker threads that run out of things to do can steal tasks from other threads that are still busy. See this article for much more detailed answer of this question.
53) What is difference between calling wait() and sleep() method in Java multi-threading?
Though both wait and sleep introduce some form of pause in Java application, they are tool for different needs. Wait method is used for inter thread communication, it relinquish lock if waiting condition is true and wait for notification when due to action of another thread waiting condition becomes false. On the other hand sleep() method is just to relinquish CPU or stop execution of current thread for specified time duration. Calling sleep method doesn't release the lock held by current thread. You can also take look at this article to answer this question with more details.
That's all on this list of top 50 Java multi-threading and concurrency interview questions. I have not shared answers of all the questions but provided enough hints and links to explore further and find answers by yourselves. As I said, let me know if you don't find answer of any particular question and I will add answer here. You can use this list to not only to prepare for your core Java and programming interviews but also to check your knowledge about basics of threads, multi-threading, concurrency, design patterns and threading issues like race conditions, deadlock and thread safety problems. My intention is to make this list of question as mother of all list of Java Multi-threading questions, but this can not be done without your help. You can also share any question with us, which has been asked to you or any question for which you yet to find an answer. This master list is equally useful to Java developers of all levels of experience. You can read through this list even if you have 2 to 3 years of working experience as junior developer or 5 to 6 years as senior developer. It's even useful for freshers and beginners to expand their knowledge. I will add new and latest multi-threading question as and when I come across, and I request you all to ask, share and answer questions via comments to keep this list relevant for all Java programmers.
Source:http://javarevisited.blogspot.com/2014/07/top-50-java-multithreading-interview-questions-answers.html
Tidak ada komentar:
Posting Komentar